[Dagofast]

Any special way to remove?
Would like to get them painted as they are pretty faded

I removed the nuts
Soaked with WD4
Don’t want to pry to hard and break something

thanks

 

[Chrishiznit]

interested mine are faded too. If too hard you can always tape off and plastidip

 

[EvanK]

I replaced one of mine because the paint had bubbled up a bit on it. No tricks to getting them off once you’ve removed the nut. It is a splined taper joint so it’s a PITA. Some small pullers may fit but just take great care around the windshield.

 

[Kai]

you can buy a "wiper arm removal tool" but i cant say i've ever needed one... just usually give them a good wiggle when pulling.

 

[SeaLegs]

Soak with wd-40 and gently move them the same motion they would if you turned the wipers on. They should wiggle out after that