Lamborghini Talk banner
1 - 2 of 2 Posts

· Registered
Joined
·
655 Posts
Yes we changed camber by using modified Tokico (Japanese car) camber plates...caster could be changed a little and toe as well !

Obviously hard to fit the plates in the front...but it can be done...

Generally more negative camber...created better high speed (race track) handling but also wore out street tires much faster !

In "normal driving" the factory settings are OK...but changing rear toe can make the car easier to drive for some...

Paul
 

· Registered
Joined
·
655 Posts
Keep in mind that the S car had a massive front suspension "insert/spacer" to permit the use of the lower aspect P-7 tire. Compared to a much more modern tire like the Yokohama 008 and 008R the P-7 is a 1970's relic !

It added enormous drag and a 225 mm 008 could easily outhandle the 345mm or whatever it was P-7

I do not recall the standard limits of camber on the Urraco but we used about -2.0 degrees in the front and up to -2.5 degrees in the rear...but with different stiff rollbar bushings.

All the S cars that I have driven fast are a handful...they tramline and are unstable in transitions...if rear-toe goes positive due to wear on components...look out !

Paul
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top