Lamborghini Talk banner

Urraco Parts Cross Reference! (And resuming a restoration project!)

2K views 3 replies 4 participants last post by  Jsykm 
#1 ·
Hello Everyone!

Long time lurker, I have #15580 that is finally beginning restoration after being tucked away for 12 years!
I have arranged an engine builder and a body shop, and work will commence next month!

Right now my task is to find parts cross reference for all the other bits, and my main intention for this post is as below.

As you know, many of the Urraco's parts are shared with other cars, and buying parts from other manufacturers can bring costs down significantly! I hope to create a reference list for Urraco parts in this post, and I hope that you will share with me all that you have found.

I will start with what I know so far, please feel free to correct me or add to the list (like specific part numbers also), and I will update it as we go along!


Lamborghini Urraco Parts cross Reference

Door handles – Fiat X 1/9

Front brakes: 1972 BMW 5 series or the 2002 Ti, a spacer between the two halves of the caliper, which allows for the wider disc used by Lamborghini

Rear brakes: BMW 2002 (Ti?)

Brake master cylinder: no longer available, refurb original.

Valve Shims: Ford Escort diesel, Alfa Romeo (X1/9?)

Clutch Plate: Mercedes 240 SL? (R107?) part# LUK 323006216

Distributor: Marelli S 127 E as used in the early Euro Ferrari 308's w/ dual coils.


I hope you will contribute to this list!

Thank you!
 
See less See more
#3 ·
Hi,

front calipers and brake pads are from BMW 3,0 S / CS / CSi.... BMW uses the same spacer because they also have vented discs.

rear calipers are (front) calipers from BMW 2002 (not ti / tii !!)... a spacer must be added for the use in an Urraco

rear brake pads are (front) brake pads from BMW 2002 (not ti / tii)

clutch pressure plate is from BMW M5 (E34)

clutch disc is from Mercedes 280 SL (Pagoda)

this is what we used in my P300

Regards, Matzo
 
#4 ·
Hello Everyone!

Long time lurker, I have #15580 that is finally beginning restoration after being tucked away for 12 years!
I have arranged an engine builder and a body shop, and work will commence next month!

Right now my task is to find parts cross reference for all the other bits, and my main intention for this post is as below.

As you know, many of the Urraco's parts are shared with other cars, and buying parts from other manufacturers can bring costs down significantly! I hope to create a reference list for Urraco parts in this post, and I hope that you will share with me all that you have found.

I will start with what I know so far, please feel free to correct me or add to the list (like specific part numbers also), and I will update it as we go along!


Lamborghini Urraco Parts cross Reference

Door handles – Fiat X 1/9

Front brakes: 1972 BMW 5 series or the 2002 Ti, a spacer between the two halves of the caliper, which allows for the wider disc used by Lamborghini

Rear brakes: BMW 2002 (Ti?)

Brake master cylinder: no longer available, refurb original.

Valve Shims: Ford Escort diesel, Alfa Romeo (X1/9?)

Clutch Plate: Mercedes 240 SL? (R107?) part# LUK 323006216

Distributor: Marelli S 127 E as used in the early Euro Ferrari 308's w/ dual coils.


I hope you will contribute to this list!


Distributor cap and rotor are the same on an Alfa Montreal. Got one way cheaper from Alfaholics in the uk.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top