Lamborghini Talk banner
1 - 4 of 4 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter · #1 ·
Hi all
somehow my rearview camera angle on my Huracan EVO has shifted and wanted to know if there is a clean way for removing the plastic cover and get the camera readjusted again.
It looks like some clip on plastic piece, but I am a little worried of forcing it off and damaging something.
Any help on how to remove this plastic cover is greatly appreciated.
Regards
 

·
Registered
Joined
·
1,308 Posts
There are a few Youtube videos about taking the rear bumper cover off, which is what you need to do to get to the camera. It is held on by two screws.
@ 5:10
 

·
Registered
Joined
·
24 Posts
Entire rear bumper must come off, that video is OK but forgets to tell you to remove both rear fender liners , this is important as the main rear bumper harness is uNader the passenger side fender liner. Became not to break clips , have two people handy to do final removal and set on something soft.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top