Lamborghini Talk banner
1 - 4 of 4 Posts

·
Registered
Joined
·
148 Posts
Discussion Starter · #1 ·
Hi everyone. Do we know what output is generated by the side mirror switch when turned to the "fold" position?

Is it:
1. Triggering a CANBUS fold signal?
2. Switching on a simple 12V momentary signal?
3. Switching on a simple 12V constant signal?
4. Normally 12V but switch to ground when in "fold"?

And if anyone can point me at a pin-out diagram of the connector that would be useful too. I am trying to see if I can add an auto fold module to our mirrors since I always park with the mirrors folded.
 

·
Registered
Joined
·
148 Posts
Discussion Starter · #2 ·
To clarify, I meant the signal at the switch itself (the switch above the e-gear plate, next to the rear-view camera button.
 

·
Registered
Joined
·
78 Posts
Cant answer the question directly, but here is a link to the workshop manual. Might be able to figure it out from the wiring diagrams there? I have been looking through them. They are helpful but not super informative.

 
1 - 4 of 4 Posts
Top