Lamborghini Talk banner
1 - 7 of 7 Posts

·
Registered
Gated Giallo Midas
Joined
·
169 Posts
Discussion Starter · #1 ·
Car went into the shop for an oil change and the mechanic, who I have known for a long time noticed my rotors are quite worn and suggested I replaced them. He said these rotors below will fit no problems.

They are from a 2003-06 Audi RS6
Zimmerman vented drilled rotors

I did search and members have used RS6 rotors with zero issues but I wanted to double confirm before I went a head with his suggestion.

Thanks guys.
 

·
Registered
Joined
·
2,340 Posts
The RS6 rotors fit. I put the Audi wave rotors on a friend's pre-LP.



However, I suggest going with Girodisc rotors over stock as they are lightweight, larger than the OEM rotors and serviceable.
 

·
Registered
Gated Giallo Midas
Joined
·
169 Posts
Discussion Starter · #3 ·
The RS6 rotors fit. I put the Audi wave rotors on a friend's pre-LP.



However, I suggest going with Girodisc rotors over stock as they are lightweight, larger than the OEM rotors and serviceable.
I really like those wave rotors!

Would you recommend these one floating wave rotor then?

Actually, the Girodisc is abit thicker so it'll be better for braking. I will go with Girodisc instead!
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top