Lamborghini Talk banner

Countach Gear Gate Tool

1686 Views 2 Replies 3 Participants Last post by  phantom309
My Countach has three screws holding the gear stick's open gate down. The screw heads are flat and have two small holes, presumably for a tool to grip onto it to tighten the screw.

They seem a little loose. I have asked in auto stores and they don't have such a tool.

Any ideas?
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top