Lamborghini Talk banner
1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
As the title states, I received a license plate bracket and hardware (see picture) from Glen. I thought this would be simple to attach but none of the currently drilled holes in my bumper line up with the bracket, with the exception of the middle hole. Does anyone know how this attaches and could provide some guidance?

I could not find this after searching the forums. Thanks to everyone for your help in advance!

296622


296621
 

·
Registered
Joined
·
733 Posts
I mounted mine with just the center bolt, nice and tight. Has never moved.
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #3 ·
Thank you @iownedu. I was able to find a bolt that fit the center hole and it feels pretty sturdy! Eventually I plan to get the other holes filled and the bumper repainted.
 

·
Registered
Joined
·
758 Posts
Thank you @iownedu. I was able to find a bolt that fit the center hole and it feels pretty sturdy! Eventually I plan to get the other holes filled and the bumper repainted.
You can also go to Home Depot, purchase a flat piece of aluminum flashing ($10)

drill two sets of holes into the flashing. One set aligns the flashing to the car holes and the other set aligns to your license plate bracket.

good luck
 
1 - 4 of 4 Posts
Top