Lamborghini Talk banner
1 - 6 of 6 Posts

·
Registered
2013 Lamborghini Gallardo LP560-4
Joined
·
55 Posts
Discussion Starter · #1 ·
Does anyone know where the e gear fluid reservoir is located on a 2013 lp560? all I was able to find is the prelp information.
-getting code p0780 mostly occurs when car is on incline otherwise all works great
-clutch was done within the past year so trying to trouble shoot or if anyone has any ideas
TIA
 

·
Registered
2013 LP560 TT
Joined
·
271 Posts
Does anyone know where the e gear fluid reservoir is located on a 2013 lp560? all I was able to find is the prelp information.
-getting code p0780 mostly occurs when car is on incline otherwise all works great
-clutch was done within the past year so trying to trouble shoot or if anyone has any ideas
TIA
I had the same frustration when I started working on mine. Here is your answer:

 

·
Registered
2013 Lamborghini Gallardo LP560-4
Joined
·
55 Posts
Discussion Starter · #4 ·
I had the same frustration when I started working on mine. Here is your answer:

appreciate it! I was totally lost on where this thing could be …now have to try to figure the easiest way to access it ?
 

·
Registered
2013 Lamborghini Gallardo LP560-4
Joined
·
55 Posts
Discussion Starter · #5 ·
I had the same frustration when I started working on mine. Here is your answer:

Why on earth would they put it in such an inaccessible location makes me just wonder.
 

·
Registered
2013 LP560 TT
Joined
·
271 Posts
appreciate it! I was totally lost on where this thing could be …now have to try to figure the easiest way to access it ?
Well, there’s lots of stuff in there. It least it is accessible without removing the drivetrain (I’m looking at you Ferrari 😂).
The heatshield has 4 bolts. Two seen from above and two best accessed by removing the right rear wheel and wheel well cover. It’s still a bit of a reach but I got a small (1/4”) socket wrench in there with (I think) a 10mm socket.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top