 |
 |
 |
        |
|
|||
|
|
|
|
|||||||
| Register for FREE Access! | Home | Forum | Premium Member | Active Topics | Gallery / Garage | Mark Forums Read | Auto Escrow | Auto Loans |
 |
|
|
LinkBack | Thread Tools |
12-25-2012, 04:22 AM
|
||||
|
||||
I used some 3M commercial dbl sided tape to put on two skid plates and the stuff is very tough, should be no problem holding on light CF side sills if you're nervous about screws. At the most one or two screws in combo with the tape.
    
|
| Sponsored Links | ||
Advertisement | ||
|
12-25-2012, 09:01 AM
|
||||
|
||||
|
For the people that dont want to drill 10 holes you can probably get away with only drilling 3 holes. One in the front one in the middle and one in the rear and can also put down double sided tape and your good to go!
__________________
WWW.IMSAUTOMOTIVEDESIGN.COM Your number one resource for OEM and aftermarket Lamborghini parts. www.torofanatics.com The Forum. Join us today. John@imsautomotivedesign.com Work. 917-559-2952
|
|
12-26-2012, 01:42 PM
|
||||
|
||||
|
Quote:
__________________
WWW.IMSAUTOMOTIVEDESIGN.COM Your number one resource for OEM and aftermarket Lamborghini parts. www.torofanatics.com The Forum. Join us today. John@imsautomotivedesign.com Work. 917-559-2952
|
|
12-26-2012, 02:22 PM
|
||||
|
||||
|
Quote:
Any DIYs on how to remove the factory side sills, so I can install the side skirts properly??? If I'm going to remove the side sills, I'll most likely order the proper washers/bolts etc. from Lambo.... 
__________________
Anima sana in corpore sano 2009 LP560-4 (Nero Noctis) 2012 BMW X6M 2006 BMW Z4M Last edited by TTBear; 12-26-2012 at 02:25 PM.
|
|
12-26-2012, 06:58 PM
|
||||
|
||||
|
Quote:
__________________
WWW.IMSAUTOMOTIVEDESIGN.COM Your number one resource for OEM and aftermarket Lamborghini parts. www.torofanatics.com The Forum. Join us today. John@imsautomotivedesign.com Work. 917-559-2952
|
|
12-30-2012, 07:29 AM
|
||||
|
||||
|
Ok so side skirts are all done. The correct way to install these are. One you need a lift. So much easier. You will have to remove all 4 of your tires to remove the wheel wells. One's you have done that then you can start to unscrew all the screws that need to be removed to take off the rocker panel off. I installed the side skirts to were I think looks the best for me. Then ahead we went with drilling holes in the rocker panels. Nothing crazy. Put the screws in, attached the washers from the inside and then bolted them down with some nuts and all done. Hope this helps : ) IMS baby
 Any one looking for any parts let me know.    
__________________
WWW.IMSAUTOMOTIVEDESIGN.COM Your number one resource for OEM and aftermarket Lamborghini parts. www.torofanatics.com The Forum. Join us today. John@imsautomotivedesign.com Work. 917-559-2952 Last edited by jstrat85; 12-30-2012 at 07:31 AM.
|
|
12-30-2012, 11:21 AM
|
||||
|
||||
|
Mine appear to be attached by 7 screws. Couldn't see real well but did it by feel. They look like Allen or torx heads.
__________________
2008 Gallardo Spyder Sold  2012 Gallardo Spyder 
|
|
12-30-2012, 03:20 PM
|
||||
|
||||
|
Quote:
__________________
WWW.IMSAUTOMOTIVEDESIGN.COM Your number one resource for OEM and aftermarket Lamborghini parts. www.torofanatics.com The Forum. Join us today. John@imsautomotivedesign.com Work. 917-559-2952
|
|
12-30-2012, 04:26 PM
|
||||
|
||||
|
Great job John! Way too much work for me for side skirts! If I were in FL, I have IMS do it!
How long did it take IMS to do this? I'm sure the second one took less time than the first one.
__________________
2009 Lamborghini Gallardo LP560-4 2014 Lamborghini Aventador Coupe LP700-4 (Dec 13 Build Date Allocation)
|
| Sponsored Links | |
Advertisement | |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
