Renown R70 Rear V2

Ray@Renown · #1 (**permalink**) 02-19-2013, 10:44 AM

We are proud to announce that we are creating a new rear end for the 04-08 Gallardo, the R70 v2 Rear Bumper. This bumper allows you to retain your existing diffuser and exhaust tips while using the LP560 factory grill. This design with the combination of the wider grill adds a factory appeal aggressiveness to the car. Like the rest of our products, this bumper is covered by our life time protection plan.

The bumper is priced at $3500

Ag02M5 · #2 (**permalink**) 02-19-2013, 12:47 PM

Looks great! What material?

coupe07 · #3 (**permalink**) 02-19-2013, 02:33 PM

N.i.c.e!!!!

Ray@Renown · #4 (**permalink**) 02-19-2013, 03:15 PM

It's vacuum bagged FRP twill cloth with foam core and using Epoxy Resin.

Flash Gordon · #5 (**permalink**) 02-19-2013, 06:18 PM

Not a bad upgrade... especially for those of us with broken plastic tabs inside our existing rear grills....

Ray@Renown · #6 (**permalink**) 02-19-2013, 06:48 PM

Thanks, I think EVERYONE fits into that category. lol

Ag02M5 · #7 (**permalink**) 02-19-2013, 07:08 PM

So does it have integrated tabs? i.e. does not require inner skeleton?

Ray@Renown · #8 (**permalink**) 02-19-2013, 07:09 PM

right it does not require the plastic inner bumper. I have tabs built in that are a lot stronger than the factory plastic tabs. I add a little bit of carbon fiber on the back side of the tabs for extra reinforcement.

BatmanDSM · #9 (**permalink**) 02-19-2013, 07:21 PM

Ray,

I saw this a couple of days ago, even better... Does it come with the mounting hardware and Black Grill? The single Tips may work better since I have aftermarket Exhaust. On my Wish List as well as the Front Bumper and carbon fibre skirts! Excellent Item...

Ray@Renown · #10 (**permalink**) 02-19-2013, 07:26 PM

Thanks. It does not come with the LP grill. I can get it for you, but it's about $2k from the dealer. You would use your same mounting hardware.

I have also looked into making grills and selling them at a lower price BUT the factory grill is really worth the money. It is cast aluminum because it has a vertical kink as well as a horizontal curve which cannot be recreated without doing cast. All of the cells also have depth to it as they are all about .25-.5" deep.

I've looked into making it, but they would be one dimensional like my bumper grills and due to the size and the number of cuts needed, it would still be $1,000. With that price difference, I personally would just opt for the factory grill.

I've seen chicken wire used by other companies, but it looks cheap to me.

Remove Advertisements Sponsored Links
Lamborghini-Talk.com Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)