I decided to check the injectors visually, to my surprise I found a injector crushed and bent.
i did a couple of the test suggested on LamboWeb Home Page .
One was to check the temp of the exhaust manifold and noticed that #12 was very cool compared to the others and #7 was really hot.
Second was with a stethoscope to hear the injectors.
#12 was on the quite side.
So I decided to take the injectors out and that is when i discovered that #12 had maybe it actually had been forced in on an angle plus the o-ring was torn.
Visually the injectors looked very dirty. When i get a chance i will post a pic of the bent injector.
Hopefully this is my problem

Good catch, I hope that's it, I was thinking fuel, but didn't narrow it down to the injectors, let us know for sure.

Heh, I just took a stab in the dark. Wow, you must have had a lot of free time to work on this today!

Not much free time but amazingly enough it only took about an hour to get all the injectors out.
I am very determined to figure this problem out, so if this is not the answer i will find the answer out sooner or later.
thanks again for the suggest and help