|
|||
|
|
|||||||
| Register for FREE Access! | Home | Forum | Premium Member | Active Topics | Gallery / Garage | Mark Forums Read |
| V12 Tech Posts of a technical nature related to all V12 Lambos |
![]() |
|
|
LinkBack | Thread Tools |
|
|||
|
The jacks are just for support at the moment, when the lift starts the car will be raised with extra jacks, when the gearbox is removed the car is lowered so the engine clears the rear end, then the gearbox is hoisted out.
![]() |
|
|||
|
While waiting for the hoist we decided to carry on with the other tasks. The dashboard needs re leathering as well as the instrument cluster to be renewed due to the old one having suffered in the sun.
The old heater/Aircon fan is comming out and I will see if I can get an upgraded one, the same size but more output. However we did find a piece of very old foam that had been in there since new. ![]() |
|
||||
|
We used nitro thinner, you can also use the cleaner thinner the car painters use to clean the brushes, it works perfect, I cleaned the velocity stacks with this and a paintbrush.
__________________
RaymondQV Countach QV Ex-Mimran #GLA12997, Urraco P300 #20530 sold in August 2008, Jalpa #FLA12203 sold in May 2006 www.countach.ch www.jalpa.ch When Frank Sinatra got his Miura S in 1970, he said: “If you wanna be someone, buy Ferrari - If you are someone, you own a Lamborghini”. |
|
|||
|
Thanks again for the information, I actually just found a company here in Murcia that makes a carburettor specific cleaning fluid, I will let you know, it is 12.36 Euros for 25 liters !!
|
|
||||
|
dirt cheap, go and get it!!!!
__________________
RaymondQV Countach QV Ex-Mimran #GLA12997, Urraco P300 #20530 sold in August 2008, Jalpa #FLA12203 sold in May 2006 www.countach.ch www.jalpa.ch When Frank Sinatra got his Miura S in 1970, he said: “If you wanna be someone, buy Ferrari - If you are someone, you own a Lamborghini”. |
|
|||
|
Hi Terry, have a look about and see if there are any cheap ultrasonic cleaning baths for sale (Ebay, etc). I was given one about 3 years ago and it is perfect for doing parts like carbs, etc. It leaves them with a good exterior finish without the elbow work. I put them in the cleaner, switch on and leave them overnight. Works a treat!
Al Cowan |
![]() |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|