 |
 |
 |
        |
|
|||
|
|
|||||||
| Register for FREE Access! | Home | Forum | Premium Member | Active Topics | Gallery / Garage | Mark Forums Read |
| V12 Tech Posts of a technical nature related to all V12 Lambos |
 |
|
|
LinkBack | Thread Tools |
10-30-2006, 02:43 PM
|
||||
|
||||
Is the later model Diablo's use the same bellhousing as the earlier ones?
I am wanting to retro fit my 92 diablo with the secondary master clutch cylinder with a later one. It appears that the later model ones reverse the slave cylinder since it a little bit bigger and then they have the linkage that goes to the arm for the clutch.
What I am wondering is...if I get the later model slave cylinder will it fit my transmission bell housing like my old one? I think there are a few snap rings involved but wasn't sure. Doesn't seem to be a whole lot of trouble to change this out and make my clutch pedal feel a little more easier. What you think?  
__________________
1992 Lamborghini Diablo 1992 Ferrari 512TR     
|
|
10-30-2006, 03:05 PM
|
||||
|
||||
|
I know that the newer version breaks very often but is softer to clutch, a friend with a 1999 Diablo had a larger slave installed and now the clutch is very smooth to operate.
__________________
RaymondQV Countach QV Ex-Mimran #GLA12997, Urraco P300 #20530 sold in August 2008, Jalpa #FLA12203 sold in May 2006 www.countach.ch www.jalpa.ch When Frank Sinatra got his Miura S in 1970, he said: “If you wanna be someone, buy Ferrari - If you are someone, you own a Lamborghini”.
|
|
10-30-2006, 03:37 PM
|
||||
|
||||
|
Quote:
Was it a Lambo Slave unit or something else? Looking at the picture, it appears that the 1992 pushes the lever "clockwise" and the newer model pulls the lever to the right or "counter clockwise". is this correct? So would it require me to change out more parts?
__________________
1992 Lamborghini Diablo 1992 Ferrari 512TR
|
|
10-30-2006, 05:17 PM
|
||||
|
||||
|
I am also trying to figure out on the later Diablo's which way the lever is pushed or pulled in what direction?
Is it the same as the early Diablos? 
__________________
1992 Lamborghini Diablo 1992 Ferrari 512TR
|
|
10-30-2006, 11:41 PM
|
||||
|
||||
|
There is no Lamborghini Clutch cylinder, there was never one, it comes all from Lancia, Alfa, Fiat etc... I can ask my mechanic what he installed in that SV.
__________________
RaymondQV Countach QV Ex-Mimran #GLA12997, Urraco P300 #20530 sold in August 2008, Jalpa #FLA12203 sold in May 2006 www.countach.ch www.jalpa.ch When Frank Sinatra got his Miura S in 1970, he said: “If you wanna be someone, buy Ferrari - If you are someone, you own a Lamborghini”.
|
|
10-30-2006, 11:47 PM
|
||||
|
||||
|
Quote:
Also you know in what direction the lever goes when the clutch is pushed in on the later models?
__________________
1992 Lamborghini Diablo 1992 Ferrari 512TR
|
|
10-31-2006, 12:37 AM
|
||||
|
||||
|
It has to be left, to the right is not enough room... on the picture yopu posted the clutch is not pushed, you can see from the rubber seal and the blank metal.
The clutch itself was not changed, only the cylinder and lever to push. He only changed the old cylinder against the new one and greased everything with copper grease. The clutch cylinder is from the Alfa 33 (like on the Countach).
__________________
RaymondQV Countach QV Ex-Mimran #GLA12997, Urraco P300 #20530 sold in August 2008, Jalpa #FLA12203 sold in May 2006 www.countach.ch www.jalpa.ch When Frank Sinatra got his Miura S in 1970, he said: “If you wanna be someone, buy Ferrari - If you are someone, you own a Lamborghini”. Last edited by raymond : 10-31-2006 at 02:18 AM.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
