|
|||
|
|
|||||||
| Register for FREE Access! | Home | Forum | Premium Member | Active Topics | Gallery / Garage | Mark Forums Read |
| V12 Tech Posts of a technical nature related to all V12 Lambos |
![]() |
|
|
LinkBack | Thread Tools |
|
|||
|
Hi Guys Have A 1991 Diablo And Seems To Be Running Towards Hi Temperature 120 Degrees Fans Start To Work Around 90 Degrees But On A General Run It Seems To Get Hot Very Quickly.have Checked Coolant Levels The Could Any One Also Help Regarding Bleeding The Coolant System What Method?
Also Could Any One Tell Me What Oil Pressure Should Read On The Guage And Also Oil Temperature. Car Is Based In Australia. Regards Gerard Redbull |
|
||||
|
To bleed, there are 2 caps under the tail, or wing if you have one, one on each side, mounted on top of the cooling pipes. Get car to temp with heat on and open slowly to release all the air, use a rag underneath it will leak out some. Then carefully tighten, not to tight you will break them.
|
![]() |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
|