Diablo Injector

mattgibbon02 · #1 (**permalink**) 04-21-2006, 12:21 AM

hi
i can confirm that the weber iw031 fitted to the diablo is the same item from the moto guzzi california and many other models from 89-97.
they can be sourced for a good rate from guzzi dealers in eu and au, not sure about the us.
the guzzi dealer i purchased my unit from said they are common in ducati as well.

**fl_355** · #2 (**permalink**) 04-21-2006, 04:12 AM

Good Info - will add to my reference book... might want to post same in the sticky above..

silvergts1998 · #3 (**permalink**) 04-21-2006, 12:06 PM

These injectors look like the bosch 42lb ford motor sport injectors. These bosch injectors are high impedance, are the lambo's high impedance?

mattgibbon02 · #4 (**permalink**) 06-01-2006, 11:06 PM

if you call webcon in the uk, i am sure they will help on the impedence values.
matt

ltadmin · #5 (**permalink**) 06-02-2006, 12:07 AM

Frank,

what was the other thread you wanted stickyed?? I remember it was important, but I forgot, but I'll add it!

silvergts1998 · #6 (**permalink**) 07-26-2007, 10:10 PM

Diablo injectors flow about 19lb at 36 psi. I had the stock ones bench tested and they are high impedance injectors that run about 14-16 ohms. The bosch injectors will fit the harness and injector bungs/ rails.

hazim · #7 (**permalink**) 10-01-2007, 03:20 PM

Does anyone know the replacement part number for the injectors??

are they Ford numbers or Bosch?

TIA

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)