Carbon fibre and your Lambour.... - Page 11

surenrobson · #**101** (**permalink**) 06-05-2008, 01:11 AM

New Look For Your Car Today~!!

Ready For Some Changes Of Your CAR?? Come On Down To ROBSON DESIGN Today And Get Your Interior/ Exterior Change~!!

Feel free to make enquiry or call us at 6515 1204

ROBSON DESIGN PTE LTD

50 Bukit Batok St23
Midview Building, #01-20
Singapore 659578

Thanks & Regards
Tierra ^_~*
tierra@robson-design.com
Robson Design Pte Ltd
Robson-design

surenrobson · #**102** (**permalink**) 06-09-2008, 12:09 AM

Hi ALL,

Recently Completed~!!

Feel free to make enquiry or come down to our Showroom and take a look at our other finishes product.

ROBSON DESIGN PTE LTD

50 Bukit Batok St23
Midview Building, #01-20
Singapore 659578
6515 1204

Thanks & Regards
Tierra ^_~*
tierra@robson-design.com

surenrobson · #**103** (**permalink**) 06-10-2008, 09:48 PM

Hi ALL,

Recently Completed~!!

Feel free to make enquiry or come down to our Showroom and take alook at our other finishes product.

Robson Design Pte Ltd

50 Bukit Batok St23
Midview Builiding, #01-20
Singapore 659578
6515 1204

Thanks & Regards
Tierra ^_~*
tierra@robson-design.com

surenrobson · #**104** (**permalink**) 06-12-2008, 10:19 PM

Hi ALL,

New Arrival~!!

Feel free to make enquiry or come down to our Showroom and take a look at our other finishes product.

Robson Design Pte Ltd

50 Bukit Batok St23
Midview Building, #01-20
Singapore 659578
6515 1204

Thanks & Regards
Tierra ^_~*
tierra@robson-design.com

silvergts1998 · #**105** (**permalink**) 06-12-2008, 10:49 PM

So when are you going to make Diablo parts?

villain · #**106** (**permalink**) 06-13-2008, 07:33 AM

I would be very wary of this stuff de-laminating. I have a full CF interior in my Porsche turbo and the factory stuff starts looking like crap after a few years and has to be replaced. My understanding is the the type of UV protection necessary to prevent the sun damage (in addition to proper preparation in the lamination process) is very very expensive.
So not sure what this guy is charging, but for interior CF, i personally wouldnt want my Gallardo rolling around with yellowing, peeling, cracking, etc. CF. If factory Porsche does it, I would just be wary of anyone elses.
MACarbon has a good rep and does their work in Belgium...but havent had long term experience with their products either.

just my 2cents.

surenrobson · #**107** (**permalink**) 06-13-2008, 08:29 PM

Hi vallain,

Thank you for your interest enquiry.

We are specialize in Genuien Carbon Fiber Lamination for all cars Interior & Exterior.

Our Genuien Carbon Fiber Finishes :

- Using Real Carbon Fiber To Over Lay On Your Exsiting Parts. ( Up To 20 Layers Of Resin Coating )

- Unique 3D Effect Finishing

- Scratch And Perfume Resistant

- Able To Withstand Heat/ Moisture

- Able To Repair If Damage

- Permanent Solution To Wear & Tear As It Keeps Your Panels Looking New

- Product Comes With Quality Assurance & Warranty.

Feel free to come down to our Showroom and have a look at our other finishes product.

Robson Design Pte Ltd

50 Bukit Batok St23
Midview Building, #01-20
Singapore 659578
6515 1204

Thanks & Regards
Tierra ^_~*
tierra@robson-design.com

Quote:

Originally Posted by villain

I would be very wary of this stuff de-laminating. I have a full CF interior in my Porsche turbo and the factory stuff starts looking like crap after a few years and has to be replaced. My understanding is the the type of UV protection necessary to prevent the sun damage (in addition to proper preparation in the lamination process) is very very expensive.
So not sure what this guy is charging, but for interior CF, i personally wouldnt want my Gallardo rolling around with yellowing, peeling, cracking, etc. CF. If factory Porsche does it, I would just be wary of anyone elses.
MACarbon has a good rep and does their work in Belgium...but havent had long term experience with their products either.

just my 2cents.

dreamcast18 · #**108** (**permalink**) 06-13-2008, 10:04 PM

Folks,

I'll be headed to Singapore from June 25th - July 4th (from LAX).

Short trip, but if anyone wants me to check them out or bring some parts to Robson...lemme know.

surenrobson · #**109** (**permalink**) 06-13-2008, 10:19 PM

Hi dreamast18,

thanks alot..

Will let you know ^_^

Wish you'll enjoy your trip in Singapore.

Regards
Tierra

Quote:

Originally Posted by dreamcast18

Folks,

I'll be headed to Singapore from June 25th - July 4th (from LAX).

Short trip, but if anyone wants me to check them out or bring some parts to Robson...lemme know.

surenrobson · #**110** (**permalink**) 06-13-2008, 10:21 PM

Hi ALL,

Recently Completed~!!

** Price Includes Installation, Quality Assurance And 1yr Warranty.

Feel free to make enquiry or come down to our Showroom and have a look at our other finishes product.

Robson Design Pte Ltd

50 Bukit Batok St23
Midview Building, #01-20
Singpore 659578
6515 1204

Thanks & Regards
Tierra ^_~*
tierra@robson-design.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)