Hi

That's it, right side front wheel bearing is gone, in my -82 Countach, well actualy makes litle sound when moved in garage.

How do you change these bearings, are bearins tight in the hub, if so, do I take out entire hub? Is there tips and things to know, when changin?

and is front Bearing part numbers for SKF:
NU2207ECP
and
62207-2RS1

And does enyone know SKF numbers for rear bearigs?

thanks

__________________
My writen English is as good as your spoken Finnish

All you do is remove the snap ring and tap the inner bearing out, the outer bearing is pressed on the hub.

Rear bearing is 6011 and 62211.
If you have any problem getting any of these, drop me a note, I have them in stock, I also have the seals.
Chadbourn Bolles
803 532 6257

No, not getting it open...

I have to take hub of, because I can't get ring nut open...(tav. 33 "countach5000s spare part manual" part 71 number008253501)

does it exist tools for these kind of nuts, I made my tool using socket and "U" shape nail in side socket... works very well.

__________________
My writen English is as good as your spoken Finnish