Water pump rebuild
Carrying on from the previous post, picture 1 shows the washer I am talking about you can see the groove in the middle of the washer, once I took the top of the pump off again it became pretty clear where the part goes, this can be seen in picture 2 the washer is turned upside down and it fits on top of the seal. Picture 3 shows the washer in place NOTE the seal is spring loaded and you need to press it down to get the washer down and then insert the key. Picture 4 shows the parts back together again. I need to source 2 orings for the top and bottom grooves, middle groove remains clear.
__________________
Jalpa ELA12175
Last edited by Jalpa_Aus : 03-26-2008 at 05:58 AM.
Reason: spelling
|