Hi to all at Lamborghini-talk.

I'm new to this having recently bought a 91 Diablo from the middle east which is in need of a bit of TLC.
Gradually getting things sorted... however, although having driven the car prior to purchase , when it arrived in uk was misfiring quite badly. Wasn't too concerned as I wanted to completely renovate the engine bay, renewing as much as possible , including all the ignition side of things ...
I'm now at the stage of trying to get the car running.... Having bought a workshop manual I found out about the On-Off ignition test to check the warning lights ... this is the result .... can anyone tell me if what I'm looking at makes sense ...

ON-OFF three times ..... on 4th ON-OFF both lights come on then ...

Both flash..... Check left 5 times , Check right 11 times ...

Then both go off.....
Followed by Right coming on and staying on.

According to manual , 5 flashes indicate Engine Speed and T.D.C Sensor, and 11 flashes an Air intake sensor ..

I have measured resistance on both and both appea to be in limits. However, that was directly from sensors and not at ECU end .
I live a long way away from my nearest Lambo specialist so would like to try to check everything I can myself . Do any of you know the pin configuration for the ECU plugs ?
If I knew this I could check all is good at ECU end ...

Any help appreciated

Alternatelaw