Continued
Thanks THECARREAPER, it is good fun to do but time consuming.
The first picture shows the first two nuts to undo on the under side of the spoiler, it doesn't matter what order you do but have something under the spoiler to support while you undo all the nuts, if the spoiler drops down too far then spacers and air vents that can also be seen in the first image will fall off. The nuts and bolts were 10mm on some accasions it is nessecary to have the spanner on top to hold the bolt as in the 2nd picture, space is tight for some of them (getting to the top of bolts) but they are all possible.
In the third picture you can see the rest of the nuts and washers that need to be removed.
As can be seen in the forth picture, I put the nut and washer back on while the spoiler is lowered about an inch, not enough for the spacers to fall off but enough to get the washer and nut back on.
__________________
Jalpa ELA12175
|