A couple folks had asked me if I would take some measurements of the cable once I got it out. Turns out the cable was broke inside the sheathing about 1/2 way up the passenger side.
But here are the measurements for those folks that wanted to know:
Wire Diameter: 3.0mm
Lead Piece that is "swaged" on the end of the wire: 7.6mm OD
Brass Barrel that attaches at the caliper: 10.0mm Diameter x 17.6mm wide x 7.9mm hole (where the lead piece recesses in)
I'm not sure what the total length of the wire is, since mine was pretty frayed where it broke. But, I can measure the new one, once it gets here.
__________________
Mike
Jalpa #12071
Aerodynamics are for people who can't build engines -- Enzo Ferrari
|